Just like how your car and AC need servicing, the same goes for your water purifier. Your water purifier works day in and day out so that it can give you 24/7 access to healthy drinking water. So, it is only fair that you take care of it and maintain it properly.
One of the most important parts of maintaining your RO and UV water purifiers is replacing the filters and the cartridges. Are you new to the world of water purifiers and clueless about how to clean and maintain your water purifier? Here is a complete guide that will help you in becoming a pro at changing your water purifier’s filter at home.
Importance of Replacing the Filters
Before we dive into how to replace the filters of your RO and UV water purifier, it is crucial to understand why we are stressing so much about this topic. It is because your filters do the heavy lifting and filter out all the sediments, heavy metals and other contaminants in the tap water. Over time, they wear out and get damaged. If you don’t address this issue in time and overlook it, then it will hamper the effectiveness of your water purifier. This will compromise the quality and taste of your water and prove to be counterproductive.
How to Change the Filters of Your Water Purifier?
Today most of the water purifiers are user-friendly and are designed in a way that DIY water filter replacement is possible. Here’s how you can change the water filters of your water purifier.
- Before you start the process, unplug your water purifier from the electrical outlet. Switch off the water supply and then proceed. This will prevent the risk of electric shock.
- After this, read the manufacturer’s guide and locate the filter housing of the water purifier. It is typically on the right side of the purifier or the bottom of it.
- Twist or press the filter and remove it.
- Note the direction in which the RO or UV membrane tube was installed so that you can put the new one correctly. If it proves to be difficult to remove the tube of the RO or UV membrane with your hands, you can use needle-nose pliers.
- Next, prepare the new filters. Follow the instructions given by the manufacturer. Typically, you might have to rinse the new filter for a short period before you install it. Your new filter might also require flushing before it is ready to use.
- Now insert the new RO or UV membrane into the housing. Make sure that it is properly seated so that it clicks in properly for optimum performance.
- Turn on the water supply and check for any leaks. Once you are sure that the filter is installed properly, you can plug your water purifier back into the outlet.
- As mentioned above, you might have to flush a few litres of water through your new filter before it is ready to be used.
Why Choose AO Smith Water Purifiers?
There are a plethora of reasons why AO Smith RO and UV water purifiers are the best in the market. To begin with, AO Smith water purifiers provide super-quality filtration in comparison to the other water purifiers on the market. You can enjoy 100% RO purified water with these water purifiers that are free from all kinds of contaminants. Another reason why you must consider AO Smith water purifiers is that their filters don’t require frequent replacements and they have a longer lifespan, saving you a lot of time and energy.
Sceptical about replacing the water filters of your RO and UV water purifiers on your own? We can understand that it can be overwhelming, especially if you have never done it before. You would be relieved to learn that AO Smith also provides a comprehensive 1-year warranty that also includes filter replacements along with other perks. So, this means that you can simply get in touch with their customer care and request them to visit your home and get your water purifier’s filters replaced when it is due free of cost. So, what are you waiting for?
