Did you know that the bulk of the money you spend on powering your house goes towards heating it? Did you know that for the average American household, heating costs make up about half of their monthly energy bills?
The Factors
Several factors go in favour of keeping your furnace in top shape and operating at peak efficiency. Making educated decisions is especially important when it comes to the tools you use and how well you maintain them throughout the year. Regular maintenance and inspections are necessary to keep your furnace running at its best.
Tips for Keeping Your Heater in Good Working Order
They ignore the problem until it becomes critical. Nevertheless, in most cases, problems aren’t noticed until after damage has been done. If you can catch an issue before it gets out of hand, your equipment will keep running well whether you use it nonstop for a week or for many weeks. Regular maintenance will reduce the amount of time it is out of commission. To keep your furnace in good working order, just do this quick checklist. And yes, you need to choose the furnace service.
The filter has to be cleaned or replaced.
The filter within your furnace is crucial to the process of delivering warm air throughout your home. The usual location for a furnace filter is just before the return duct enters the furnace. Before entering the furnace’s heating components, the air is filtered to remove dust and other impurities. Dust, dust mite faeces, pollen, pet dander, germs, and spores are just some of the elements that a furnace filter might trap and eliminate.
Low-cost filters provide a minimum safeguarding level. Because of how they’re made, a significant fraction of the dust and other particles that circulate through your home will be trapped by them. Those with respiratory conditions like allergies and asthma may want to consider purchasing pricier air filters.
A dirty air filter will prevent the proper circulation of air, preventing the furnace from heating the room as efficiently as it might. Replacement of inexpensive air filters is advised every 30–90 days. Expensive disposable pleated air filters may last as long as three months, or even longer, depending on the effectiveness of your heating system. For more information, please refer to the manufacturer’s manual or get in touch with one of our knowledgeable specialists.
Make that the blower’s motor is working correctly.
The term “furnace blower motor” refers to the device that turns the fan that provides ventilation for the heating appliance. In a furnace, the heat exchanger is preheated by the heating element to the desired temperature. The next step in the heating process is for the blower motor to drive air through the heat exchanger. Hence, the air is heated and then distributed throughout the dwelling. Most HVAC ventilation systems rely on air supplied by furnace blowers, as do most furnaces.
Conclusion
Typically, the furnace blower and the air filter will be installed in the same housing. As the blower motor contains several moving parts, it may rapidly degrade if not serviced regularly. You may need to replace the electric motor or the blower wheel if your furnace’s blower is producing a lot of noise. High, grating sounds are often produced when two metal surfaces grind against one another.
